An older AWD test cannot establish the current Lynk & Co 08 EM-P’s low-charge performance or running cost. Identify the actual battery, drivetrain and grade before transferring a result between production versions. For a Central Asian family, a useful comparison should describe both the car and the amount of stored electricity used during the journey.
Sources checked 24 October 2026. I Auto Export commercially sources vehicles. This is our buying analysis of cited manufacturer material and, where identified, original reporting. It is not our own road test or inspection of a particular car.
What is the current manufacturer reference?
Lynk & Co’s current Chinese 08 page lists a 38.2 kWh battery and advertises 30–80% charging in under 15 minutes under manufacturer conditions. Its 456 kW, 905 Nm and 4.6-second performance footnotes name the 210 AWD Performance Ultra H7. These are not universal figures for every 08 grade or a measurement of the vehicle being offered.
Request the full grade sheet, battery identification and fitted equipment. Keep the charging claim with its stated charge interval, rather than compare it with a full-charge session. Ask for a demonstration on relevant equipment, including the connector and the car’s own display. Record any power limitation, battery condition and charging failure instead of replacing missing evidence with a peak-power headline.
What changes when charge is low in the older test?
Shi Gengchen’s original Autohome report of 17 July 2024 tested a 2023 220 km AWD Performance Halo with 39.6 kWh. Acceleration changed from 4.80 seconds charged to 7.83 seconds depleted. Its high-ring fuel test returned 9.85 L/100 km over 243 km averaging 120.1 km/h; the starting charge display was missing and ending charge was 4%. That is a specific older test, not today’s winter result.
The useful lesson is to keep operating regimes separate. Ask how the offered car responds with the charge level and load typical of your long journey. For energy comparisons, keep starting and ending charge beside fuel and distance. If a record omits those details, do not use a small difference between two reported fuel numbers to rank offers.
Include support and family use in the decision
SAMR S2026M0112V includes some 08 vehicles. Confirm VIN scope and completed remedy before shipment.
Obtain the dated response and any work record for the selected VIN. Separately confirm installed assistance hardware, software and destination availability. A package name does not establish the functioning service after export. Keep campaign work and ordinary service access explicit in the proposal, including where unresolved work will be carried out.
Try the rear seating and luggage with the full intended family arrangement. Assess repeated bumps and cabin controls at ordinary pace, with the actual tyre package recorded. Demonstrate the phones and language required by the driver. Choose the car on its complete version, usable charging and documented condition; a strong headline in a different battery version cannot close those practical questions.
Use the model page and request an offer with destination, production preference, passengers and route. Ask for a complete specification and inspection of the offered vehicle, with written answers to open questions before comparing the full purchase terms.
